Mechanic In a Bottle

• Revitalises Stale Fuel
• Cleans Carb & Injectors without removing the carby
• Removes water and cleans carbon.
• READ LABLE AND HANDLE AS INSTRUCTED

For automotive pour 40ml of Mechanic in a bottle per 5 litres of unleaded fuel in the tank. Start and run the engine for at least 15 minutes. Performance improves over time, do not drain the tank. 

For smaller 2 and 4 cycle engines that are running poorly complete the same as above for automotive. If the engine is not running at all then drain the fuel system completely, for smaller engines such as line trimmers put 60ml of MIB in the tank and for larger engines such as ride-on mowers put 120ml into the tank and prime it through into the carby using the pull cord or primer bulb. For best results let the engine sit for at least 4 hours (overnight best) and then put fuel in the tank and start the unit. Repeat as needed. 

Capacity 236ml