Our Location on Google mapsFollow us on FacebookVisit us on Google+Follow Us on FoursquareVisit Henderson Mowers & Chainsaws on Yelp
Shopping Cart
Shopping (0 Items)

Stihl TS 440 Cutquik Demolition Saw

Brand: STIHL
Product Code: 42380112809
Availability: Available on Request

The worlds first concrete demolition saw with a brake system! This demolition saw has a specific purpose on the construction site and is a great addition to your fleet of equipment making certain jobs much safer for the operators. This saw is specifically designed for limited access cuts such as situations like bottom portions of walls, cutting corners and cutting the underside of in-ground pipes. 

The guard can be rotated to open it up for certain cuts making it more suitable for tight spaces. The open guard makes this tool more dangerous to use though which is nullified by the use of the break which automatically applies itself when it senses the unit kick back during the cut instantly stopping the blades. This motion sensor break is the first of its kind on cutoff saws stopping a blade in a fraction of a second after kick back. Watch the video for more information and read the specifications and features below!

This tool has a specific purpose on the site and its important for you to realise it's not designed to replace a TS 420/500/700/800 at all. This saw rotates the blades at 50% less speed than those other units but has more torque so that it does not bog down during these difficult cuts. The unit has fewer blades applicable to it and is more costly to maintain as the brake needs to be serviced, so it's important you're buying it for the right application as stated above. It's not for cutting paths etc. that's what your other Stihl Cutquik saws are for!

*For illustration purposes, the saw is shown with a diamond blade. It is not included in the price

$1,899.00 $1,726.36 ex
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
Stihl TS 440 Cutquik Demolition Saw
  • Specifications
  • Features
  • Videos
Specifications
66.7cc
3.2 kW
11.2kg (dry weight inc. guard and water attachment)
2,525 rpm
9,000 rpm
20mm
350mm (14")
125mm (4.9")
Fuel (2-stroke)
2 year domestic warranty / 1 year commercial
Features
Stihl QuickStop Wheel Brake
This allows the saw to be safely operated in the open guard position where the motion sensors will sense any kickback from the saw and instantly apply the break stopping the blade almost instantly. This makes it very safe to operate with the exposed blade showing and allows you to make cuts you wouldn't make with any other demo saw on the market.
Stihl X2 Air Filtration System
The biggest operator fault that kills demolition saws (besides putting straight fuel in them....) is lack of air filter maintenance. These units get used and abused. The conditions they operate in mean that they are almost always operating in a dusty atmosphere sucking in air that is far from clean. That is why the air filter must be checked regularly but unfortunately it does not often occur. This saw features the Stihl X2 filter which is revolutionising demo saw maintenance by allowing them to last up to a year based on average cutting conditions. The system results in air entering the saw in a swirl motion which removes 80% of the dust before it reaches the filter. This pre cleaned air is then sifted through both the primary and secondary air filters before being sent into the engine. This results in it maintaining an incredible 99.96% cleaning efficiency!!!!
Electronic Water Control (EWC)
This allows the operator to adjust the water disbursement whilst cutting and also turns the water off automatically when you release the trigger and leave it at idle! The system evenly disburses the water either side of the blade!
IntelliCarb Compensating Carburettor
This is a Stihl innovation! The compensating carby is designed to automatically adjust the fuel/air ratio when the air filter becomes restricted or partially clogged to maintain the correct RPM and performance during operation. It uses the clean side of the air filter to control the diaphragm and flow of the fuel. As the filter becomes dirty and the air intake is restricted the IntelliCarb system adjusts the fuel flow to compensate for the decrease in the air flow. This is in contrast to competing models that have carburettors that utilise this air from the dirty side of the air box.
Anti-Vibraton System
Using a demo saw always results is significant vibration causing fatigue for the operator. Thats why Stihl's anti-vibration system is an innovative piece of technology that sets it apart from the rest. The vibration system sees the oscillations from the engine dampened reducing the handle vibration.
Stihl ElastoStart
Stihl elastostart reduces the shock caused by the compression of the engine when starting it. The shock is reduced by the users joints and muscles through the spring or rubber element in the starter handle making it more comfortable to start for the operator.
Bayonet-Style Fuel Cap
Stihl has designed a fuel cap that is exceptionally easy to operate whilst having thick work gloves on.
Adjustable Guard
This is where the saw really sets itself apart. the rotating guard removes it out of the way to complete those near impossible cuts!

No manuals are currently available

Stihl TS 440 Cutquik Concrete SawStihl TS 440 Cutquik Concrete Saw
STOCKISTS OF
StihlHondaTotoCub CadetGA SparesRoverGreenfieldChristie EngineeringBriggs & Stratton.pngBilly GoatMTD ProductsVictaTruYardAtomGoldacresPrime PowerMarolex
We Accept Direct DebitWe Accept PaypalWe Accept Master cardWe Accept VisaBuy Now, Pay Later with zipPaySecure Certificate